A fan coil unit (FCU) is a simple device consisting of a heating or cooling coil and fan. It is part of an HVAC system found in residential, commercial, and industrial buildings. Mostly a fan coil unit is useful to adjust the temperature in the space where it is installed, or serve multiple spaces and not consort to ductwork. It is controlled either by a manual on/off switch or by thermostat. Fan coil units have been designated to deliver local warming and chilling for several years and there are still many positive attributes that justify the choice of a fan coil unit system today. It is necessary for the Fan Coil Unit Manufacturers to constantly respond to changing market demands and satisfy increasingly stringent legislation. Trosten Industries is one of the leading manufacturers in this category in UAE.

A concealed fan coil unit will normally be installed within a reachable ceiling void or services zone. The return air grille and supply air diffuser, typically set flush into the ceiling, will be ducted to and from the fan coil unit and thus allows a great degree of suppleness for tracing the grilles to suit the ceiling layout and/or the partition layout within a space. It is quite common for the return air not to be ducted and to use the ceiling void as a return air plenum. The coil accepts hot or cold water from a central plant, and removes heat from or adds heat to the air through heat transfer. Traditionally fan coil units can contain their own internal Thermostat, or can be wired to operate with a remote thermostat.

Fan coil units have vast gritty chilling and heating outputs and therefore they afford the installer a cooling and heating solution that is compact in physical size. Areas that have a large heating or cooling requirement may be serviced by either a small number of large fan coil units or a large number of small fan coil units, low quantities of fan coil units lessen initial system principal cost and space required for the terminal unit installation whereas high quantities of fan coil units provide the flexibility to easily change building layouts and the potential to reduce system operating costs. Fan Coil Unit Manufacturer are putting every probable effort to attain the end goals of value creation and customer satisfaction.  Although fan coil units are capable of providing heating using either hot water or refrigerant, they are typically supplied with low temperature hot water. The principal advantage being that the use of water as the heating medium negates the need for the specific checking and maintenance.

 

Tags:

Comments are closed here.